Best picks

8 Best Trolling Motor Battery Chargers (November 2026)

Updated on · By the Outdoors Sports Gear Reviews team

The best trolling motor battery chargers include the Battery Tender Plus 12V 1.25 AMP Car for long-term 12V maintenance, the NOCO GENIUS1 1A 6/12V Smart Battery Charger for small mixed-chemistry batteries, and the NOCO GENIUS5 5A 6/12V Smart Battery Charger for most single-battery setups.

On this page (8 sections)
  1. How we chose the best trolling motor battery charger
  2. Best trolling motor battery chargers compared
  3. How many amps should a trolling motor battery charger have?
  4. Do you need a 12V, 24V or 36V trolling motor battery charger?
  5. Single-bank versus 2-bank trolling motor battery chargers
  6. Should a trolling motor battery charger support lithium?
  7. How should you connect and store a trolling motor battery charger?
  8. Best trolling motor battery charger verdict

The best trolling motor battery charger for most single-battery setups is the NOCO GENIUS5, because its 5A output gives a practical middle ground between slow maintenance and high-output charging. It supports 6V and 12V deep-cycle, marine and LiFePO4 batteries, while LiTime is the better match for 2-bank lithium systems.

A trolling motor battery and charger need to match in 4 areas: battery voltage, chemistry, charging current and bank count. A 12V charger cannot replace a 24V charger, and a single-port charger cannot charge 2 separate batteries at the same time.

If you are starting with battery basics, read what is a deep cycle battery before choosing a charger. For marine-specific options, compare our guide to the best marine deep cycle battery charger.

Our picks at a glance

  1. 1 Battery Tender Plus 12V 1.25 AMP Car
    Best for long-term 12V maintenance

    Battery Tender Plus 12V 1.25 AMP Car

    9.7/10 our score

    See it on Amazon
  2. 2 NOCO GENIUS1 1A 6/12V Smart Battery Charger
    Best for small mixed-chemistry batteries

    NOCO GENIUS1 1A 6/12V Smart Battery Charger

    9.6/10 our score

    See it on Amazon
  3. 3 NOCO GENIUS5 5A 6/12V Smart Battery Charger
    Best for most single-battery setups

    NOCO GENIUS5 5A 6/12V Smart Battery Charger

    9.5/10 our score

    See it on Amazon
  1. 4MOTOPOWER MP00205A 12V 800mA Automatic Battery ChargerCheck it
  2. 5Schumacher Electric 15A Car Battery Charger

    Schumacher Electric 15A Car Battery Charger

    Best for fast 6V or 12V charging
    Check it
  3. 6Battery Tender Junior 12V

    Battery Tender Junior 12V

    Best for small 12V storage batteries
    Check it
  4. 7PZ.P 15-Amp 12V/24V Smart Battery Charger

    PZ.P 15-Amp 12V/24V Smart Battery Charger

    Best for 12V and 24V flexibility
    Check it
  5. 8LiTime 2-Bank 12V & 24V 10A Lithium

    LiTime 2-Bank 12V & 24V 10A Lithium

    Best for 2-bank LiFePO4 systems
    Check it

How we chose the best trolling motor battery charger

The best charger depends on how your battery bank is wired and how quickly you need charge restored. We compared output, voltage, chemistry support, charging stages, connectors and bank count.

Our score weighs specs, features and buyer feedback, with products in score order.

Output matters because a weak charger will leave a large deep cycle battery waiting after every trip. Current must sit alongside voltage and chemistry, since stronger is not always right.

Voltage is the first filter for many owners. A 12V only charger suits a single 12V battery, while 6V and 12V or 12V and 24V models give more flexibility for mixed equipment.

Chemistry matters because lead acid, AGM, gel and LiFePO4 batteries do not share the same profile. A charger listing your exact chemistry is easier to set up and safer to leave on maintenance.

Charging stages shape daily use, with multi stage programs moving from bulk to absorption and then float. That helps a battery finish without staying at a high rate.

Connectors and cable length affect fit in a crowded compartment. Clamps suit temporary charging, while ring terminals or eyelets suit a fixed setup.

Bank count decides whether you charge one battery at a time or two together. A single bank charger is simpler for one battery, while a 2 bank model suits separate batteries that should be ready together.

A low output maintainer suits a boat sitting between trips. A 5A or 15A charger suits faster recovery, and a 2 bank model suits two batteries charging together.

ProductBest forOutputConnectionsCompatible devicesOur score
Battery Tender Plus 12V 1.25 AMP Carlong-term 12V maintenance12V, 1.25AAlligator clips and ring terminalCars, motorcycles, lawn mowers and ATVs9.7
NOCO GENIUS1 1A 6/12V Smart Battery Chargersmall mixed-chemistry batteries6V and 12VBattery clamps and integrated eyelet terminals9.6
NOCO GENIUS5 5A 6/12V Smart Battery Chargermost single-battery setups6V and 12V, 5ABattery clamps and integrated eyelet terminals9.5
MOTOPOWER MP00205A 12V 800mA Automatic Battery Chargersimple 12V upkeep12V DC, 800mAClamp and ring terminal cables9.2
Schumacher Electric 15A Car Battery Chargerfast 6V or 12V charging15A charging current9.1
Battery Tender Junior 12Vsmall 12V storage batteries12V, 750mAAlligator clips and ring terminals9.0
PZ.P 15-Amp 12V/24V Smart Battery Charger12V and 24V flexibility12V 15A or 24V 8ABattery clamp and alligator clips8.9
LiTime 2-Bank 12V & 24V 10A Lithium2-bank LiFePO4 systems14.6V and 29.2V charging profiles8.2

Best trolling motor battery chargers compared

The NOCO GENIUS5 is the strongest all-purpose pick, while the other chargers solve specific needs such as long-term storage, high output, 24V support or dual-bank lithium charging.

1

Battery Tender Plus 12V 1.25 AMP Car: Best for long-term 12V maintenance

Battery Tender Plus 12V 1.25 AMP Car, trolling motor battery chargers
9.7/10Our score
  • 12V output
  • 1.25A charging current
  • 4-step charging program
  • Fused ring terminal and alligator clip cables

The Battery Tender Plus fits a 12V battery that needs steady charging and float maintenance. Its 1.25A output is more purposeful than a small maintainer while remaining suited to long-term storage.

See it on Amazon

Pros

  • 4-step charging
  • Quick disconnect harness
  • Includes 10-year manufacturer's warranty

Cons

  • 12V only
  • Not a multi-bank charger

The Battery Tender Plus is a strong choice for a 12V trolling motor battery that spends more time stored than used. Its 1.25A output is higher than the Battery Tender Junior's 750mA output, so it gives a little more charging capacity while still fitting maintenance duty.

The 4-step charging program moves from charging to float maintenance. Battery Tender includes both a fused ring terminal cable and alligator clip accessory cables, giving you two connection styles for a fixed or temporary setup.

This charger has 12V output and one port, so it fits a single 12V battery rather than a 24V or 36V bank. Its listed compatible devices include cars, motorcycles, lawn mowers and ATVs, so confirm that your trolling motor battery's voltage and chemistry match before connecting it.

The two-color LED shows charge status, and the quick disconnect harness helps you remove the charger without undoing the battery connection. Battery Tender includes a 10-year manufacturer's warranty and lifetime customer support.

Battery Tender Plus 12V 1.25 AMP CarCheck it on Amazon
2

NOCO GENIUS1 1A 6/12V Smart Battery Charger: Best for small mixed-chemistry batteries

NOCO GENIUS1 1A 6/12V Smart Battery Charger, trolling motor battery chargers
9.6/10Our score
  • 6V and 12V output
  • 1A charging current
  • Lead-acid and LiFePO4 support
  • Temperature compensation

The GENIUS1 is a flexible low-output charger for smaller trolling motor batteries and storage duty. It can charge batteries from 1V and includes Force Mode for batteries down to 0V.

See it on Amazon

Pros

  • 6V and 12V support
  • Desulfation and temperature sensing
  • 110-inch DC cable

Cons

  • 1A output charges slowly
  • One charging port

The NOCO GENIUS1 is best for smaller batteries, mixed 6V and 12V equipment, and careful storage charging. Its 1A output is slower than the GENIUS5, but it supports lead acid types and LiFePO4 batteries up to 30Ah.

That 30Ah limit suits smaller trolling motor batteries and other low demand batteries. A larger deep cycle battery will take much longer at 1A.

The charger can work with batteries from 1V, and Force Mode is available for batteries down to 0V. That recovery feature does not remove the need to check a battery for damage before charging.

Force Mode should be treated as a recovery step rather than a routine setting. A damaged, swollen or leaking battery should not be put back into service just because a charger can attempt to charge it.

An integrated thermal sensor adjusts charging for ambient temperature. That matters in a hot garage or a cold storage space, since temperature can change how a battery accepts charge.

NOCO also includes desulfation, battery clamps, integrated eyelet terminals and a 110 inch DC cable. The long cable gives more room to place the charger away from the battery.

For a small trolling motor battery, the lower output can be easier to live with when charging speed is not the priority. For a larger battery or regular post trip charging, the 5A GENIUS5 is the more practical NOCO option.

NOCO GENIUS1 1A 6/12V Smart Battery ChargerCheck it on Amazon
3

NOCO GENIUS5 5A 6/12V Smart Battery Charger: Best for most single-battery setups

NOCO GENIUS5 5A 6/12V Smart Battery Charger, trolling motor battery chargers
9.5/10Our score
  • 6V and 12V output
  • 5A charging current
  • Lead-acid and LiFePO4 support
  • Temperature compensation

The GENIUS5 gives a single trolling motor battery more charging current than the 1A models while keeping 6V and 12V flexibility. Its design supports deep-cycle, marine and LiFePO4 batteries.

See it on Amazon

Pros

  • 5A output
  • Force Mode and desulfation
  • Mounting bracket and screws included

Cons

  • One charging port
  • Not designed for simultaneous bank charging

The NOCO GENIUS5 is the best trolling motor battery charger for most single-battery setups. Its 5A current is a useful step up from 1A and 800mA maintainers, and its 6V and 12V selection covers more battery arrangements.

It supports flooded, maintenance-free, AGM, gel, deep-cycle and marine lead-acid batteries, along with LiFePO4 batteries up to 120Ah. The temperature sensor adjusts charging for hot and cold conditions, while Force Mode handles batteries that are completely discharged down to 0V.

The GENIUS5 has one port, so it is intended for one battery at a time. Use the battery clamps or integrated eyelet terminals, then keep the charger where the 72-inch AC cable and 80-inch DC cable can reach without strain.

NOCO includes a mounting bracket, screws and a 3-year warranty. Choose this model when you want a single charger for a 12V trolling motor battery and other compatible batteries around the boat or garage.

NOCO GENIUS5 5A 6/12V Smart Battery ChargerCheck it on Amazon
4

MOTOPOWER MP00205A 12V 800mA Automatic Battery Charger: Best for simple 12V upkeep

MOTOPOWER MP00205A 12V 800mA Automatic Battery Charger, trolling motor battery chargers
9.2/10Our score
  • 12V output
  • 800mA charging current
  • Automatic desulfation
  • Alligator clamp and ring terminal cables

The MP00205A suits a 12V trolling motor battery that mainly needs maintenance between trips. Its 800mA output favors slow charging and storage over quick recovery.

See it on Amazon

Pros

  • Automatic float maintenance
  • Reverse polarity protection
  • 2-year manufacturer warranty

Cons

  • 12V only
  • Lower output than the faster picks

The MOTOPOWER MP00205A fits a 12V trolling motor battery that needs simple charging and maintenance. Its 800mA output favors slow charging and storage over quick recovery.

This suits a lightly used battery that is then stored, keeping it ready without pushing high current.

It charges to 14.4V, then maintains at 13.6V. That shift from charging to maintenance voltage makes long term storage more manageable.

The automatic program includes pulse desulfation plus reverse polarity, short circuit and overcharge protection. These features reduce manual adjustment, though you should still check the battery and connections first.

MOTOPOWER includes an alligator clamp cable, a ring terminal cable and a manual. Clamps suit a quick connection, while ring terminals suit a setup left in place.

The small 2 x 4.1 x 1.5 in body fits tight spaces, but cables need room to avoid sharp bends or moving parts. It is a 12V charger for lead acid, flooded, AGM and gel batteries, and a higher output model is better when a depleted battery needs faster recovery.

MOTOPOWER MP00205A 12V 800mA Automatic Battery ChargerCheck it on Amazon
5

Schumacher Electric 15A Car Battery Charger: Best for fast 6V or 12V charging

Schumacher Electric 15A Car Battery Charger, trolling motor battery chargers
9.1/10Our score
  • 15A charging current
  • 6V and 12V detection
  • Standard, AGM, gel and deep-cycle support
  • Charge, maintain, test and restore functions

The SC1280 is the high-output choice for a compatible 6V or 12V deep-cycle battery that needs faster charging. Its automatic controls also support maintenance after the main charge.

See it on Amazon

Pros

  • 15A rapid charging
  • Microprocessor controlled
  • Deep-cycle battery support

Cons

  • Larger 9.13 x 9.25 x 3.5 in body
  • Alligator clips only

The Schumacher Electric SC1280 is the fast-charging choice for compatible 6V or 12V deep-cycle batteries. Its 15A current suits a battery that needs charge restored in less time.

Higher current is most useful after hard use, when a slow maintainer cannot replace a day of charge before the next outing.

It supports standard, AGM, gel and deep cycle batteries, so confirm your boat battery matches one of those types.

Automatic voltage detection selects 6V or 12V, and the microprocessor controlled system handles charging, maintaining, testing and restoring. That reduces setup mistakes and adds functions beyond simple maintenance.

The 9.13 x 9.25 x 3.5 in body is larger than small Battery Tender and NOCO units, so measure space before fixing it in place.

Connections use alligator clips, which need a firm grip and a clear path without cable strain. This charger suits one compatible battery, and it does not replace a multi bank charger for simultaneous charging.

Schumacher Electric 15A Car Battery ChargerCheck it on Amazon
6

Battery Tender Junior 12V: Best for small 12V storage batteries

Battery Tender Junior 12V, trolling motor battery chargers
9.0/10Our score
  • 12V output
  • 750mA charging current
  • 4-step charging program
  • Fused ring terminal and alligator clip cables

The Battery Tender Junior is a low-output choice for small 12V batteries that spend long periods in storage. Its float mode helps maintain charge after the battery reaches full voltage.

See it on Amazon

Pros

  • Compact 2.9 x 2.15 x 4.4 in body
  • 12-foot output cord
  • 5-year warranty

Cons

  • 750mA output
  • 12V lead-acid, flooded, AGM and gel support only

The Battery Tender Junior is the best low-output option for a small 12V battery kept in storage. Its 750mA output is designed for gradual charging and maintenance rather than fast recovery.

That suits a battery stored for weeks between trips, where lower current matches a small battery needing little charge replaced.

The 4 step program covers initialization, bulk charge, absorption and float mode. Later stages help the battery finish charging and then stay ready.

After full charge, it maintains voltage instead of pushing a constant rate. That float behavior differs from a basic trickle charger that keeps pushing current.

It includes a fused ring terminal harness, alligator clip cables and a 12 foot output cord. The long cord helps when the charger sits outside the compartment, while the harness suits a permanent connection.

The two color LED shows charging state, and reversed hook up detection checks the connection. It supports 12V lead acid, flooded, AGM and gel cell batteries, though low output will take longer with a larger deep cycle battery.

Battery Tender Junior 12VCheck it on Amazon
7

PZ.P 15-Amp 12V/24V Smart Battery Charger: Best for 12V and 24V flexibility

PZ.P 15-Amp 12V/24V Smart Battery Charger, trolling motor battery chargers
8.9/10Our score
  • 15A at 12V
  • 8A at 24V
  • LiFePO4 and lead-acid support
  • 9-stage automatic charging

The PZ.P gives boat owners one charger for 12V and 24V LiFePO4 or lead-acid batteries. Its screen shows charging information, while its 9-stage program switches to float mode after charging.

See it on Amazon

Pros

  • 12V and 24V support
  • Temperature compensation
  • 6.7-foot charging cable

Cons

  • Cannot activate totally dead batteries
  • One charging port

The PZ.P charger is the best flexible option for 12V and 24V battery systems. It provides 15A at 12V and 8A at 24V, with support for LiFePO4, AGM, GEL, SLA and flooded batteries.

That voltage flexibility is the main reason to choose this charger. A boat owner with 12V equipment today and 24V equipment later may prefer one charger that can cover both systems.

Its 9 stage charging program switches to trickle or float mode after the main charge. The multi stage approach gives the battery a structured charge instead of a single constant rate.

A color screen displays charging voltage, current, internal temperature, charge percentage and operating mode. A display like this helps you check progress without guessing, especially when the charger is in use in a garage or storage area.

PZ.P includes temperature compensation, reverse polarity protection, overcurrent protection, overvoltage protection and short circuit prevention. These protections cover common connection and charging problems, but the battery voltage and chemistry still need to be set correctly before charging.

The 6.7 foot charging cable gives more placement room around a boat or garage. Extra cable length can help you keep the charger in a dry spot, although excess cable should be kept clear of heat, water paths and moving parts.

The charger cannot activate or charge totally dead batteries. Confirm the battery voltage and chemistry before use, then choose this model when you want one charger for both 12V and 24V equipment.

PZ.P 15-Amp 12V/24V Smart Battery ChargerCheck it on Amazon
8

LiTime 2-Bank 12V & 24V 10A Lithium: Best for 2-bank LiFePO4 systems

LiTime 2-Bank 12V & 24V 10A Lithium, trolling motor battery chargers
8.2/10Our score
  • Two 10A charging banks
  • 12V and 24V LiFePO4 support
  • IP65 waterproof protection
  • M8 terminal connection

LiTime is the specialized choice for two lithium batteries that need charging at the same time. Its dual 10A banks are designed for boats, RVs and trolling motors.

See it on Amazon

Pros

  • Simultaneous 2-bank charging
  • IP65 protection
  • Supports LiFePO4, NCM and lead-acid batteries

Cons

  • Focused on lithium and multi-bank setups
  • 8.8 lb body

The LiTime 2-Bank charger is the best trolling motor battery charger for a 2-bank LiFePO4 setup. It has 2 charging banks rated at 10A per bank, allowing both batteries to charge at the same time.

Simultaneous charging is the practical benefit of a 2 bank design. Two batteries can be brought back to full charge together, which can save time compared with charging them one after another.

Its charging profiles include 14.6V for 12V LiFePO4 batteries and 29.2V for 24V LiFePO4 batteries. The voltage must match the battery system in use.

It also supports NCM and lead acid batteries with different listed output combinations, so verify the battery chemistry before connecting it. A charger with several profiles is flexible, but selecting the wrong profile can create problems.

The IP65 protection class and waterproof connector are useful around marine equipment. Cables and terminals still need to be mounted so water does not collect at the connection.

The M8 terminal connection requires a compatible battery connection. Before buying, check that your battery terminals or cables can work with that connection style.

LiTime lists boats, RVs, trolling motors, backup generator systems and lawn mowers as compatible applications. At 8.8 lb, it is heavier than the single port chargers, but the dual bank design can save charging time when two batteries need attention.

LiTime 2-Bank 12V & 24V 10A LithiumCheck it on Amazon

How many amps should a trolling motor battery charger have?

Choose output based on battery size, charging time and whether you need maintenance or recovery. A 750mA, 800mA or 1A charger suits slow maintenance, while 5A balances many single battery setups.

Amperage controls how fast charge is replaced. A small battery may accept low current for storage, while a larger deep cycle battery may need more after a full day of use.

Low output chargers suit storage rather than recovery. When a boat sits unused for weeks, a maintainer replaces small losses without rushing.

A 5A charger is stronger than a 1A maintainer but gentler than 15A. It suits regular charging between trips for many owners.

A 15A charger suits faster charging when the battery supports it. The Schumacher SC1280 gives 15A, while the PZ.P gives 15A at 12V and 8A at 24V.

Faster charging cuts downtime before another outing, but it suits maintenance only needs less well. Match voltage and chemistry first, then consider current, since higher output does not fit every battery.

Battery size matters because a large battery takes longer at any current. A charger that feels fast on a small battery may be slow on a large one.

Bank count also matters. A single bank charger at 5A or 15A charges one battery or bank, while a 2 bank charger handles two batteries at once.

Check for float maintenance mode before buying. A charger that moves to float after charging is easier to leave connected than one that keeps charging steadily.

In practice, slow maintenance fits stored batteries, 5A fits many regular setups, and 15A fits batteries needing faster recovery.

Do you need a 12V, 24V or 36V trolling motor battery charger?

You need a charger that matches the battery bank voltage and charging arrangement. A 12V battery needs a 12V charging profile, while a 24V bank needs a charger designed for 24V or a compatible two-battery setup.

The PZ.P supports 12V and 24V batteries. The LiTime charger supports 12V and 24V output profiles and has 2 banks, but the products here do not provide a general 36V charging option.

Check whether your batteries are connected in series or parallel before choosing a charger. A series bank may need a charger designed for the full bank voltage, while separate batteries may need a multi-bank charger.

Single-bank versus 2-bank trolling motor battery chargers

A single bank charger charges one battery or connected bank at a time. It works well for a one battery boat or when you are happy charging batteries in sequence.

It is simpler to plan and move between batteries. You connect it, let it finish, then move it to the next battery if needed.

A 2 bank charger charges two batteries at the same time. The LiTime has 2 banks at 10A per bank, making it the clear choice here for simultaneous lithium charging.

That matters when both batteries are needed on the same trip. Charging together saves time spent waiting for one battery before starting the next.

It also suits separate batteries not wired as one bank. Each battery gets its own channel, which can be more practical than treating them as a single unit.

The trade off is cost, size and complexity. A 2 bank charger is larger and heavier than a small maintainer and needs space for two connections.

Wiring matters as much as bank count. Series, parallel or separate batteries may need different approaches, so match the bank arrangement to your boat wiring.

Terminals also affect setup. Read our guide to the best trolling motor battery terminal connectors before replacing corroded or loose connections.

Good terminals help make a clean, secure connection, while corrosion or looseness can reduce efficiency.

For one battery, single bank is often simplest. For two batteries ready together, 2 bank is more practical, and float mode can keep them ready during storage.

Match bank count to your setup first, then voltage, chemistry and current.

Should a trolling motor battery charger support lithium?

Choose a lithium-compatible charger if your trolling motor uses LiFePO4 batteries. Lead-acid, AGM, gel and LiFePO4 batteries use different charging profiles, so a charger must specifically support the chemistry in your boat.

The NOCO GENIUS1 and GENIUS5 support lead-acid types and LiFePO4 batteries. The PZ.P supports LiFePO4 and lead-acid batteries, while LiTime also supports NCM and lead-acid batteries alongside LiFePO4.

If your boat uses a lithium battery, see our guide to the best lithium battery charger for boat. For AGM batteries, compare the best marine AGM battery charger.

How should you connect and store a trolling motor battery charger?

Disconnect the battery from the trolling motor when the charger instructions require it, confirm the voltage and chemistry, and connect the correct terminals before applying power. Keep cables away from moving parts, water paths and sharp edges.

Use ring terminals for a more permanent setup and clamps for temporary charging. A battery disconnect can also make storage safer, so review the best trolling motor battery switch options for the boat's wiring plan.

Keep the charger in a dry, ventilated location unless its protection and installation instructions allow another position. Before storage, inspect the cables and terminals, then follow the charger instructions for float maintenance.

Best trolling motor battery charger verdict

The NOCO GENIUS5 is the best trolling motor battery charger for most single-battery setups because it combines 5A output, 6V and 12V support, deep-cycle compatibility and LiFePO4 support. Pick Battery Tender Plus or MOTOPOWER for slower 12V maintenance, Schumacher or PZ.P for higher output, and LiTime for 2-bank lithium charging.

That range covers most of the choices in this roundup. A low output maintainer suits storage, a 5A charger suits regular single battery charging, and a 15A charger suits faster recovery when the battery can accept it.

For a 2 bank lithium system, bank count matters more than a small increase in single bank current. Charging both batteries at the same time can be the deciding factor when two batteries need to be ready for the next trip.

For long storage, a dedicated maintainer may be a better fit than a fast charger. See our guide to the best battery maintainer for boat before choosing the final setup.

Before you buy, confirm the battery voltage, chemistry and wiring arrangement. Those details will narrow the list faster than output alone and help you avoid a charger that does not fit your boat.

If your boat uses one 12V battery, the GENIUS5 remains the most balanced pick in this group. If your setup is different, choose the charger that matches that setup rather than the highest current or the most features.

Our top 3 picks at a glance

  1. 1 Battery Tender Plus 12V 1.25 AMP Car
    Best for long-term 12V maintenance

    Battery Tender Plus 12V 1.25 AMP Car

    9.7/10 our score

    See it on Amazon
  2. 2 NOCO GENIUS1 1A 6/12V Smart Battery Charger
    Best for small mixed-chemistry batteries

    NOCO GENIUS1 1A 6/12V Smart Battery Charger

    9.6/10 our score

    See it on Amazon
  3. 3 NOCO GENIUS5 5A 6/12V Smart Battery Charger
    Best for most single-battery setups

    NOCO GENIUS5 5A 6/12V Smart Battery Charger

    9.5/10 our score

    See it on Amazon