9 Best Trolling Motor Batteries for Kayaks (November 2026)
The best trolling motor battery for kayak include the Newport Kayak Series 36lb Thrust Transom Mounted for kayak specific motor setups, the Newport Trolling Motor Smart Battery Box Power for clean battery box power, and the SUPER EMPOWER 12V 100Ah LiFePO4 Battery for long run time in a standard box.
On this page (9 sections)
- How the best trolling motor battery for kayak should fit your boat
- The best trolling motor battery for kayak options, compared
- How we compared these kayak battery picks
- What voltage does your kayak trolling motor need?
- How much capacity do you need for a kayak?
- Lithium or sealed lead acid: which should you pick?
- How should you place and secure a kayak battery?
- How do you charge and care for a kayak battery?
- Verdict: which best trolling motor battery for kayak should you buy?
The best trolling motor battery for kayak use is the SUPER EMPOWER 12V 100Ah LiFePO4, because it gives you 100Ah in a Group 24 case at 21.6 lb. That mix suits longer days without forcing a large battery box.
Weight placement matters more on a kayak than on a larger boat. A battery that is light for its capacity keeps the hull level and makes launching easier.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared capacity, weight, voltage, BMS protection and fit so you can match the battery to your motor and your storage space.
Our picks at a glance
-
1
Best for kayak specific motor setupsNewport Kayak Series 36lb Thrust Transom Mounted
9.7/10 our score
See it on Amazon -
2
Best for clean battery box powerNewport Trolling Motor Smart Battery Box Power
9.5/10 our score
See it on Amazon -
3
Best for long run time in a standard boxSUPER EMPOWER 12V 100Ah LiFePO4 Battery
9.5/10 our score
See it on Amazon
- 4
Check itECO-WORTHY Portable 12V Lithium Battery
Best for the lightest kayak carry - 5
Check itLiTime 12V 50Ah Trolling Motors LiFePO4 Lithium
Best for middle capacity and light weight - 6
Check itMighty Max Battery 12V 35AH Wilderness Tarpon
Best for sealed lead acid kayak use - 7
Check itMighty Max Battery 12V 55Ah Power Boat
Best for higher sealed lead acid capacity - 8
Check itDC HOUSE 12V 100Ah Bluetooth LiFePO4 Trolling
Best for Bluetooth 100Ah monitoring - 9
Check itLiTime 24V 50Ah Bluetooth Lithium Trolling Motor
Best for 24V trolling motors
How the best trolling motor battery for kayak should fit your boat
A good kayak battery matches your motor voltage first. A 12V motor needs a 12V battery, and a 24V motor needs a 24V battery.
Fit comes next. Measure your battery box, hatch or stern storage before you order.
Group 24 cases fit many standard boxes, while smaller lithium cases help when space is tight.
Also check what is a deep cycle battery if you are new to this. The short version is simple.
Deep cycle batteries are built for repeated discharge and recharge, which is exactly what a trolling motor needs.
The picks at a glance
The Newport kayak motor leads this roundup because it is the only complete motor here. The rest are batteries and a battery box, so read the voltage and capacity lines before you choose.
The spread in this list is wide on purpose. It runs from a 5.4 lb 20Ah lithium battery to 100Ah Group 24 lithium cases and sealed lead acid options at 35Ah and 55Ah.
That spread also shows why a single best pick rarely fits every kayak. A small recreational kayak and a larger fishing kayak put very different demands on weight, trim and storage.
The Newport Smart Battery Box sits in a different category again. It is a power center for lead acid batteries, not a battery itself, so it should be judged on wiring and protection rather than capacity.
The best trolling motor battery for kayak options, compared
Newport Kayak Series 36lb Thrust Transom Mounted: Best for kayak specific motor setups
- 36 lb thrust
- 24 in shaft
- 5 forward and 3 reverse speeds
- LED battery indicator
- Battery not included
A kayak specific transom motor built around a 12V battery, with a 24 inch shaft and 5.5 foot battery cables for flexible placement.
Pros
- Designed for kayaks and canoes
- Saltwater rated hardware
- Long battery cables help balance weight
Cons
- Battery not included
- 12V only
This Newport Kayak Series motor suits kayak anglers who want a motor designed around small watercraft. It gives 36 lb of thrust with a 24 inch fiberglass shaft, which helps keep the propeller at a workable depth on compact hulls.
You get 5 forward speeds and 3 reverse speeds, plus a 6 inch telescoping handle. That range helps with slow trolling for fish and with short bursts to move into position.
The motor head uses aluminum with corrosion resistant magnesium, zinc and stainless steel hardware. Newport rates it for saltwater and freshwater use, which matters if you fish in both.
Battery placement is flexible because the battery cables run 5 feet 6 inches. You can set a 12V battery where it balances the kayak best.
The battery is not included, so you still need to buy one.
A 5 point LED battery indicator helps you track charge during a trip. Quiet propulsion and a 2 blade propeller also help you move without spooking shallow water fish.
Trade off: this is a motor, not a battery. If you already own a motor, skip it and pick a battery below.
If you need a full setup, this is the starting point. At 20 lb for the motor alone, total carried weight will depend heavily on which 12V battery you pair with it.
Newport Trolling Motor Smart Battery Box Power: Best for clean battery box power
- 12V battery box
- USB and 12V DC ports
- Built in battery meter
- 10A and 60A circuit breakers
- Lead acid compatible only
A battery box power center that organizes motor and accessory connections behind external terminals, with USB and DC ports for small devices.
Pros
- Clean external connections
- Built in meter and breakers
- USB and DC ports
Cons
- Lead acid only, not lithium ion
- Battery not included
This Newport battery box suits buyers who want clean wiring on a kayak or small boat. It holds a 12V battery and gives you external terminals, so you do not need to open the box to connect a motor or electronics.
Built in USB and 12V DC ports let you power a phone, GPS or other small devices. That can cut extra cables and adapters on deck.
A built in battery meter helps you check charge before launch and during the day. Two circuit breakers, at 10A and 60A, help protect against overloads and wiring mistakes.
The box has a secure lid, rubber feet and a stable base. Those details help it stay put while you load and launch.
Important limit: this box is compatible only with lead acid type batteries. Newport states it is not compatible with lithium ion batteries.
Pair it with the sealed lead acid picks here, not with the lithium picks.
Trade off: the box adds 4.4 lb before you add a battery. If deck space is very tight, direct connections to a battery may be simpler.
Its 10.5 by 17 by 14 inch dimensions also need real space, so measure your kayak before assuming it will fit a small hatch.
SUPER EMPOWER 12V 100Ah LiFePO4 Battery: Best for long run time in a standard box
- 12.8V 100Ah LiFePO4
- 21.6 lb
- Group 24 size
- 100A BMS
- Low temperature charging cutoff
A 100Ah lithium battery in Group 24 dimensions, built as a drop in replacement for lead acid in standard battery boxes.
Pros
- High capacity for a Group 24 case
- 100A BMS protection
- M8 terminals
Cons
- Not for engine starting
- Needs a lithium charger
SUPER EMPOWER suits kayak owners who want a large lithium battery that still fits a standard box. It is a 12.8V 100Ah LiFePO4 battery at 21.6 lb, with Group 24 dimensions of 6.49 by 10.24 by 8.98 inches.
That size makes it a drop in replacement for many lead acid, AGM or SLA batteries. M8 terminals help with standard connections.
A built in 100A BMS protects against overcharge, over discharge, overcurrent, short circuit and temperature extremes. Charging pauses below 32F, and discharge stops at -20F, with resume above 41F.
SUPER EMPOWER recommends a 12V LiFePO4 charger at 14.4 to 14.6V. Non lithium chargers are not recommended.
The battery supports up to 4 in series and 4 in parallel. That expansion matters more for larger systems than for a single kayak.
Trade off: 100Ah is more capacity than many short kayak trips need. If you want the lightest carry, the smaller lithium picks below will be easier to move.
For a 36 lb thrust kayak motor, the 100A BMS also leaves headroom above the motor draw, which is useful when you run at higher speeds for longer stretches.
ECO-WORTHY Portable 12V Lithium Battery: Best for the lightest kayak carry
- 12.8V 20Ah LiFePO4
- 5.4 lb
- Bluetooth 5.1
- 20A BMS
- Low temp cutoff
A very light 20Ah lithium battery sized for small kayaks, with Bluetooth monitoring and a 20A BMS.
Pros
- Lightest battery in this roundup
- Bluetooth monitoring
- Compact footprint
Cons
- Lowest capacity here
- 5A limit on DC port
ECO-WORTHY suits small kayaks where every pound counts at launch. This 12.8V 20Ah LiFePO4 battery weighs 5.4 lb and measures 8.70 by 4.45 by 4.61 inches.
That compact size fits small kayaks, traps and other light marine gear. An ergonomic grip design also helps with carrying.
Bluetooth 5.1 lets you check voltage, current and capacity on your phone. That helps you plan how long you can troll before heading back.
A 20A BMS protects against overcharge, deep discharge, overload, overheating and short circuits. Low temperature protection cuts charging below 20F and stops discharge under -4F, then resumes at 32F.
ECO-WORTHY says the battery offers 4000 plus cycles and a lifespan over 10 years. It also has a 5A DC output interface for small devices, with a note to stay within that limit.
Trade off: 20Ah is the smallest capacity here. It suits short trips and light motors, but longer days may need the 50Ah or 100Ah picks.
The M5 screw terminals are also smaller than the M8 terminals on larger picks, so check that your cables and connectors match before you buy.
LiTime 12V 50Ah Trolling Motors LiFePO4 Lithium: Best for middle capacity and light weight
- 12V 50Ah LiFePO4
- 11.3 lb
- 50A BMS
- Bluetooth 5.0
- 60A continuous discharge for 30 mins
A 50Ah lithium battery at 11.3 lb, aimed at trolling motors and fish finders where carrying weight matters.
Pros
- Strong capacity to weight ratio
- Bluetooth monitoring
- Low temp cutoff
Cons
- Not for starting batteries
- Needs lithium activation charging first
LiTime suits kayak owners who want a middle ground between the tiny 20Ah pick and the larger 100Ah picks. This 12V 50Ah LiFePO4 battery weighs 11.27 lb and measures 7.68 by 6.54 by 6.77 inches.
It gives 640Wh of energy and a 50A BMS. LiTime says the battery can sustain 60A continuous discharge for 30 minutes, which helps when your motor needs peak thrust.
Bluetooth 5.0 connects to the LiTime app by QR code, with no pairing step. You can track battery status on your phone.
Low temperature cutoff stops charging in cold conditions. The BMS also guards against overcharging, over discharging, overcurrent and short circuits.
LiTime states 4000 plus deep cycles and IP65 waterproof protection. The battery is for energy storage, not for starting batteries, golf carts or jacks.
Trade off: you need a lithium activation or MPPT charger for first use or after switching Bluetooth off. Plan for that step before your first trip.
Compared with the 100Ah picks, this battery gives up total run time, but its 11.3 lb weight makes it much easier to carry to a roof rack or shore launch.
Mighty Max Battery 12V 35AH Wilderness Tarpon: Best for sealed lead acid kayak use
- 12V 35Ah sealed lead acid
- 23.2 lb
- Maintenance free
- Battery and screws only
A 35Ah sealed lead acid battery named for kayak use, with a spill proof design that can mount in any position.
Pros
- Sealed lead acid simplicity
- Mounts in any position
- UL certified
Cons
- Heavy for its capacity
- No wire harness included
Mighty Max suits buyers who prefer sealed lead acid simplicity. This ML35-12 is a 12V 35Ah sealed lead acid rechargeable battery, with dimensions of 7.76 by 5.12 by 7.01 inches.
It weighs 23.2 lb, which is heavy for a kayak. That weight can affect trim if you place it high or far aft.
The sealed lead acid design is spill proof and maintenance free. It can mount in any position and resists shock and vibration.
Mighty Max notes high discharge rate, wide operating temperatures, long service life and deep discharge recovery. The battery is UL certified.
The listing includes the battery and screws only. No wire harness or mounting accessories are included.
Trade off: lithium picks give the same or more capacity at far less weight. Choose this one if you want sealed lead acid and simple charging, and accept the carrying penalty.
Its narrow 5.12 inch width can help it fit in tighter storage than a wider Group 24 case, but you will still need to plan for the weight when you load the boat.
Mighty Max Battery 12V 55Ah Power Boat: Best for higher sealed lead acid capacity
- 12V 55Ah sealed lead acid
- Deep cycle
- Maintenance free
- Battery and screws only
A 55Ah sealed lead acid deep cycle battery for trolling motors, with more capacity than the 35Ah Mighty Max pick.
Pros
- More capacity than the 35Ah pick
- Sealed lead acid design
- Resists shock and vibration
Cons
- Lead acid weight penalty
- No wire harness included
Mighty Max suits buyers who want more sealed lead acid capacity than the 35Ah pick. This ML55-12 is a 12V 55Ah sealed lead acid rechargeable battery for trolling motors.
It measures 9.06 by 5.43 by 8.98 inches. That footprint needs a firm spot in your kayak or battery box.
The sealed lead acid design is spill proof and maintenance free. It can mount in any position and resists shock and vibration.
Mighty Max notes high discharge rate, wide operating temperatures, long service life and deep discharge recovery. The battery is UL certified.
The listing includes the battery and screws only. No wire harness or mounting accessories are included.
Trade off: capacity is better than the 35Ah pick, but weight is still a lead acid penalty. The 50Ah LiTime at 11.3 lb is far easier to carry, while this pick may suit buyers who want lead acid charging simplicity.
The F2 terminals listed for this model are also worth checking against your existing cables, since they differ from the M8 terminals used on several lithium picks.
DC HOUSE 12V 100Ah Bluetooth LiFePO4 Trolling: Best for Bluetooth 100Ah monitoring
- 12V 100Ah LiFePO4
- 23.8 lb
- Bluetooth 5.1
- 100A BMS
- Low temp cutoff
A 100Ah lithium battery near Group 24 size, with Bluetooth monitoring and low temperature protection.
Pros
- 100Ah capacity
- Bluetooth fault display
- Expansion options
Cons
- Heavier than the SUPER EMPOWER 100Ah
- Not for starting use
DC HOUSE suits buyers who want a 100Ah lithium battery with Bluetooth monitoring. This 12V 100Ah LiFePO4 battery weighs 23.8 lb and measures about 6.6 by 10.2 by 9.2 inches.
It is close to BCI Group 24 size, about 0.32 inches taller than the standard Group 24 specification. Measure your box before you order.
Bluetooth 5.1 connects to the DC HOUSE app within 5 to 10 meters. You can monitor state of charge, voltage and current, and use a fault display page for troubleshooting.
A 100A BMS provides protection, and low temperature protection cuts charging below 19.4F and discharge below -4F. It recovers after the temperature rises to 32F.
DC HOUSE says the battery can reach up to 15000 cycles and a 10 year service life. It supports expansion up to 4 in series or 4 in parallel, with a maximum of 8 batteries, but 4P4S is not allowed.
Trade off: it is 2.2 lb heavier than the SUPER EMPOWER 100Ah. Choose it if Bluetooth detail matters most.
The extra height is easy to miss on a spec sheet, so a few extra millimeters can decide whether the lid closes on your battery box or storage hatch.
LiTime 24V 50Ah Bluetooth Lithium Trolling Motor: Best for 24V trolling motors
- 24V 50Ah lithium
- 21 lb
- 50A BMS
- Bluetooth 5.0
- Group 24 design
A 24V 50Ah lithium battery for 24V trolling motors, in a compact Group 24 case that replaces two 12V batteries.
Pros
- True 24V design
- Saves space versus two 12V batteries
- Bluetooth monitoring
Cons
- Not for 12V motors
- Heavier than small 12V picks
LiTime suits owners of 24V trolling motors. This is a 25.6V 50Ah LiFePO4 battery, rated for 24V trolling motors in the 70 to 100 thrust range.
It measures 10.24 by 6.61 by 8.27 inches and weighs 21 lb. That Group 24 design saves space compared with two 12V batteries.
A built in 50A BMS offers over 20 protections. LiTime states 4000 plus cycles at 100 percent depth of discharge, plus higher cycle counts at shallower discharge.
Bluetooth 5.0 lets you monitor state of charge and voltage, and control discharge. That helps prevent unexpected shutdowns.
Low temperature protection stops discharging below -4F and stops charging below 32F. TVS surge protection and shock resistance support use in wet conditions.
Trade off: this battery will not work with a 12V motor. If your motor is 12V, use one of the 12V picks.
If you are moving to 24V, check our guide to the best 24v trolling motor battery first. Its IP65 waterproof rating and M8 terminals also make it a better fit for exposed stern storage than a battery with no stated water protection.
How we compared these kayak battery picks
We compared voltage, capacity, weight and case size first. Those four numbers decide if a battery fits your motor and your kayak.
We also checked BMS protection, low temperature cutoff and Bluetooth monitoring. Those features affect safety and how well you can track charge.
We checked charging needs too. Lithium batteries need a lithium charger.
Sealed lead acid batteries use simpler charging but weigh more.
Our best deep cycle battery for trolling motor guide covers larger boats. This post focuses on compact kayak use, where weight and fit matter more.
What the spec sheets add up to
Amp hours alone do not tell the full story. A 100Ah lithium battery at 21.6 lb and a 55Ah sealed lead acid battery carry very different weight, even though the lithium option holds almost twice the charge.
Terminal type matters in practice as well. M8 terminals appear on the larger lithium picks, while the ECO-WORTHY 20Ah uses M5 screws and the Mighty Max 55Ah uses F2 terminals.
Charging requirements also separate the list. SUPER EMPOWER specifies a 14.4 to 14.6V lithium profile, while sealed lead acid picks avoid that requirement but ask you to accept their weight.
Cycle life claims vary by chemistry and by how deeply the battery is discharged. Lithium picks in this list state 4000 plus cycles, with DC HOUSE stating up to 15000 cycles under its stated conditions.
Weight to capacity is the clearest way to read this roundup. The 20Ah ECO-WORTHY at 5.4 lb and the 50Ah LiTime at 11.3 lb show how much lighter lithium can be than sealed lead acid at similar energy levels.
What voltage does your kayak trolling motor need?
Your motor voltage decides your battery voltage. A 12V motor needs a 12V battery, and a 24V motor needs a 24V battery.
Do not mix voltages. A 24V battery will not run a 12V motor correctly.
12V motors
Most picks here are 12V. That includes the 100Ah, 50Ah, 35Ah, 55Ah and 20Ah options.
The Newport Kayak Series motor is also a 12V motor, so it pairs with any of those 12V batteries. Its 5.5 foot cables give you room to move the battery forward for balance.
24V motors
Only the LiTime 24V 50Ah pick fits a 24V motor. If you plan to upgrade, also look at the best trolling motor battery 36v options for larger motors, but do not use 36V gear on a 24V motor.
A true 24V battery in one Group 24 case, like the LiTime 24V 50Ah at 21 lb, is simpler than wiring two 12V batteries in series, which also adds cables and connection points.
How much capacity do you need for a kayak?
Capacity, in amp hours, sets your run time. More amp hours usually means longer trolling time.
A 20Ah battery suits short trips. A 50Ah battery suits many full days.
A 100Ah battery suits long days and heavier loads.
Small 12V picks
The ECO-WORTHY 20Ah is the lightest pick at 5.4 lb. It is best for short trips and very small kayaks.
If you want a small battery with more capacity, check our best small trolling motor battery guide.
Its 20A BMS and Bluetooth 5.1 monitoring are proportionate to its size, so you get charge tracking without the weight of a Group 24 case.
Mid size picks
The LiTime 50Ah at 11.3 lb is a strong middle choice. It balances capacity and carrying weight.
At 640Wh, that 50Ah pick also runs a fish finder or small electronics for a long time, which can matter when you split power between motor and accessories.
Large 12V picks
The SUPER EMPOWER and DC HOUSE 100Ah picks give the longest run time here. Both are near Group 24 size.
Their 100A BMS ratings also give more headroom for motors that draw heavily at top speed, compared with the 20A BMS on the smallest pick.
Lithium or sealed lead acid: which should you pick?
Lithium batteries give more capacity for less weight. The 50Ah LiTime weighs 11.3 lb, while the 35Ah sealed lead acid Mighty Max weighs 23.2 lb.
Sealed lead acid batteries are simpler. They are maintenance free, spill proof and use familiar charging.
Choose lithium if you carry your battery often
Lithium is best if you launch from shore, carry gear a long way or care about trim. It also gives Bluetooth monitoring on most picks here.
If weight is your main concern, read our best trolling motor battery lightweight guide.
Lithium also brings low temperature cutoff on every lithium pick here, with thresholds that differ by model. Read the cutoff temperature for your chosen battery before fishing in cold weather.
Choose sealed lead acid if you want simple charging
Sealed lead acid can be a good fit if you already own a standard charger. Accept the weight penalty and plan placement low and centered.
The Newport Smart Battery Box is only compatible with lead acid batteries, so a sealed lead acid choice also opens that clean wiring option.
How should you place and secure a kayak battery?
Place the battery low and near the center of the hull. That keeps weight down and helps trim.
Secure it so it cannot shift in waves or during launch. A sliding battery can change handling fast.
Use best trolling motor battery terminal connectors to keep connections clean and tight. Corroded or loose terminals can cause voltage drop.
A best trolling motor battery switch also helps you disconnect power for safety and storage.
Long motor cables, like the 5 feet 6 inch cables on the Newport kayak motor, give you options, but they also need routing that keeps them out of the water and clear of moving parts.
An IP65 rated battery, like the LiTime 50Ah, tolerates spray better than a battery with no stated water rating, which matters for stern storage.
How do you charge and care for a kayak battery?
Use a lithium charger for LiFePO4 batteries. SUPER EMPOWER recommends 14.4 to 14.6V for its 100Ah pick.
Do not use a non lithium charger on lithium batteries. The wrong profile can stop charging or damage the battery.
Store lithium batteries with a partial charge, and follow the maker instructions for long storage. Keep terminals clean and dry.
Low temperature cutoff protects lithium batteries in cold weather. Do not try to charge a lithium battery below its cutoff temperature.
Bluetooth monitoring on the LiTime, DC HOUSE and ECO-WORTHY picks helps you check state of charge before you leave, so you can spot a battery that needs charging at home rather than at the launch.
For sealed lead acid picks, the main care steps are keeping terminals clean, securing the battery, and following the maker recharge guidance after use, since they are maintenance free but not immune to poor connections.
Verdict: which best trolling motor battery for kayak should you buy?
Pick the SUPER EMPOWER 12V 100Ah if you want long run time in a Group 24 case. Pick the ECO-WORTHY 20Ah if weight matters most.
Pick the LiTime 50Ah if you want a middle ground.
Pick the Newport kayak motor if you need a complete motor and battery setup. Pick the Newport battery box only with lead acid batteries.
Pick the LiTime 24V 50Ah only if your motor is 24V. Voltage match comes before capacity.
Start with your motor voltage, then your storage space, then your trip length. That order will point you to the right pick faster than chasing the largest capacity.
Our top 3 picks at a glance
-
1
Best for kayak specific motor setupsNewport Kayak Series 36lb Thrust Transom Mounted
9.7/10 our score
See it on Amazon -
2
Best for clean battery box powerNewport Trolling Motor Smart Battery Box Power
9.5/10 our score
See it on Amazon -
3
Best for long run time in a standard boxSUPER EMPOWER 12V 100Ah LiFePO4 Battery
9.5/10 our score
See it on Amazon
Frequently asked questions
What is a deep cycle battery for a kayak trolling motor?
A deep cycle battery is built to be discharged and recharged over and over. That suits a trolling motor, which draws steady power for hours rather than a short burst to start an engine.
Can I use a car battery for a kayak trolling motor?
No. A starting battery is built for short bursts.
A kayak trolling motor needs a deep cycle battery that can handle long, steady draws and repeated recharging.
Do I need lithium or sealed lead acid?
Lithium gives more capacity for less weight. Sealed lead acid costs less up front and uses simple charging, but weighs more for the same capacity.
What size battery fits most kayak setups?
Start with your motor voltage and your battery box or storage space. A 12V motor needs a 12V battery, and a 24V motor needs a 24V battery.
About this guide: Our look at trolling motor battery for kayak draws on maker specs, materials and what owners report. See how we research.



