9 Best OUPES Portable Power Stations (October 2026)
The best OUPES portable power stations include the Jackery Explorer 300 Portable Power Station for light loads on short trips, the Jackery Explorer 1000 v2 Portable Power Station for portable 1kWh power, and the BLUETTI Elite 100 V2 Portable Power Station for UPS and quick recharging.
On this page (4 sections)
The OUPES Mega 1 is the clearest OUPES choice in this comparison, with 1,024Wh capacity, 2,000W continuous output and expansion support. It fits buyers who need more output than a compact phone and camera charger, but want a station smaller than the multi-kWh class.
This roundup compares the OUPES Mega 1 with portable stations that show how capacity and output change across common use cases. You can also compare VTOMAN portable power stations as another brand lineup.
It includes compact options for small devices, 1kWh models for broader loads and larger batteries for longer backup needs.
For a broader look across outdoor use cases, see our Best Outdoor Portable Power Station 2026. To understand capacity, output and recharging basics, start with what a portable power station is and our guide to how to use a portable power station.
Our picks at a glance
-
1
Best for light loads on short tripsJackery Explorer 300 Portable Power Station
9.7/10 our score
See it on Amazon -
2
Best for portable 1kWh powerJackery Explorer 1000 v2 Portable Power Station
9.6/10 our score
See it on Amazon -
3
Best for UPS and quick rechargingBLUETTI Elite 100 V2 Portable Power Station
9.6/10 our score
See it on Amazon
- 4
Check itOUPES Mega 1 Portable Power Station 1024Wh
Best for expandable OUPES power - 5
Check itBLUETTI Elite 30 V2 Portable Power Station
Best for compact UPS backup - 6
Check itAnker SOLIX S2000 Portable Power Station
Best for longer fridge backup - 7
Check itWestinghouse iGen400s 400 Watt
Best for small electronics and lights - 8
Check itDJI Power 1000 V2 Portable Power Station
Best for quiet 1kWh use - 9
Check itDJI Power 2000 Portable Power Station
Best for high-capacity DJI backup
Which OUPES portable power station fits your load?
The OUPES Mega 1 is the featured OUPES model here, while the other picks provide useful capacity and output comparisons. For another budget-oriented lineup, see VEVOR portable power stations.
For more budget choices, compare portable power stations under 250 dollars.
Choose based on the devices you need to run and how long you need them powered.
Jackery Explorer 300 Portable Power Station: Best for light loads on short trips
- 292Wh capacity
- 300W rated output
- 7.5 lb listed in product title bullets
- USB-C, USB-A, AC and car ports
This compact station suits phones, cameras and laptops when their combined draw stays within 300W. Its 292Wh capacity is much smaller than the 1kWh class, so it fits shorter, lighter power needs.
Pros
- Compact 292Wh capacity
- 300W rated output
- 100W USB-C PD port
Cons
- Limited for larger appliances
- Solar panel sold separately
The Jackery Explorer 300 is a useful reference point for a small, portable load. For compact options at a lower price point, see portable power stations under 100 dollars.
Its 292Wh capacity and 300W rated output can suit phones, cameras and a laptop, provided their combined draw stays below the output limit.
The station has two AC outlets, a 100W USB-C PD port, two USB-A ports and a 120W car port. At 7.5 lb according to the product bullets, it is easier to carry than the 1kWh models in this group.
Jackery gives an estimate formula of 300Wh × 0.85 divided by device watts. A 60W device works out to about 4.3 hours on that estimate, but actual runtime depends on use and conversion losses.
Choose it for a short trip with modest electronics. It is too small for buyers who need to run high draw appliances or need a large reserve of stored energy.
Jackery Explorer 1000 v2 Portable Power Station: Best for portable 1kWh power
- 1,070Wh capacity
- 1,500W AC output
- 23.8 lb
- Three AC ports
A 1,070Wh battery and 1,500W AC output cover a wider range of loads than a small device charger. The stated weight is 23.8 lb, and the foldable handle helps with carrying.
Pros
- 1,500W AC output
- Three pure sine wave AC ports
- LFP battery
Cons
- Solar charging is compatible only with Jackery panels
- Solar panel sold separately
The Explorer 1000 v2 adds capacity and output for buyers with several devices or a larger appliance load. It combines 1,070Wh with 1,500W AC output and weighs 23.8 lb.
Three pure sine wave AC ports sit alongside two USB-C ports, one USB-A port and a DC car port. Jackery also describes a fast charging mode that reaches full charge in one hour when emergency charging is enabled in its app; the default full charge time is 1.7 hours.
Solar charging is compatible only with Jackery panels, which matters if you already own panels from another brand. Its 1kWh class capacity offers more flexibility than the Explorer 300, though runtime still depends on what you connect.
Pick it if you want a 1kWh station with 1,500W output and a foldable handle. Consider the Mega 1 if you need 2,000W continuous output or want the option to add compatible battery capacity.
BLUETTI Elite 100 V2 Portable Power Station: Best for UPS and quick recharging
- 1,024Wh capacity
- 1,800W rated AC output
- 10ms UPS switchover
- 25 lb
The Elite 100 V2 pairs 1,024Wh with a 1,800W rated output. It also has a stated 10ms UPS switchover and reaches 80% charge in about 45 minutes through AC fast charging.
Pros
- 1,800W rated output
- 10ms UPS switchover
- App control over Wi-Fi and Bluetooth
Cons
- 25 lb to carry
- Third-party solar panels must meet input limits
The BLUETTI Elite 100 V2 is a close capacity match for the Mega 1, with 1,024Wh and 1,800W rated output. Its key distinction is a stated UPS switchover time of 10ms for devices such as routers and computers.
BLUETTI says AC fast charging can bring it to 80% in about 45 minutes. It weighs 25 lb and supports app control over Wi-Fi and Bluetooth.
For solar, BLUETTI panels are supported, and third-party panels must meet its stated voltage, power and connector requirements. If you are weighing a station against a bundled solar generator setup, compare what each package includes.
This is a practical compatibility check to make before planning a solar setup.
Choose the Elite 100 V2 if the UPS feature and quick AC charging matter most. The Mega 1 has a higher continuous output rating and a stated battery expansion path.
OUPES Mega 1 Portable Power Station 1024Wh: Best for expandable OUPES power
- 1,024Wh capacity
- 2,000W continuous output
- 4,500W surge
- Expansion up to 5,120Wh
The Mega 1 is the OUPES pick here, with 2,000W continuous output and support for up to two B2 extra batteries. That can raise total capacity from 1,024Wh to 5,120Wh.
Pros
- 2,000W continuous output
- Expandable to 5,120Wh
- AC charging reaches 80% in 36 minutes
Cons
- 27.8 lb to carry
- Extra batteries are needed for expansion
The OUPES Mega 1 combines 1,024Wh capacity with 2,000W continuous output, making it the central pick for this OUPES comparison. Its 4,500W surge rating provides a separate short-term ceiling, but appliances still need to fit both the running and startup limits.
OUPES says AC charging reaches 80% in 36 minutes. It also describes combined AC and solar charging to 80% in 26 minutes, and supports up to two B2 extra batteries for a total capacity of 5,120Wh.
The station weighs 27.8 lb and includes two 100W USB-C PD ports, four USB-A ports, 12V DC outputs and AC outlets. OUPES also describes a UPS transfer time under 20ms.
This model suits buyers who may want more capacity later without adding another inverter. For a closer look at a different OUPES model, read our OUPES MEGA 2 power station reviews.
BLUETTI Elite 30 V2 Portable Power Station: Best for compact UPS backup
- 288Wh capacity
- 600W continuous output
- 10ms UPS switchover
- 9.5 lb
This 288Wh station is a compact option for low draw devices, with a 600W continuous output and 10ms UPS function. It weighs 9.5 lb, making it easier to move than the 1kWh models.
Pros
- 600W continuous output
- 10ms UPS switchover
- AC, car and solar charging options
Cons
- 288Wh capacity limits longer runtimes
- Solar charging cable may need to be bought separately
The BLUETTI Elite 30 V2 has 288Wh capacity and 600W continuous output, giving it more output headroom than many compact stations while staying below 10 lb. Its 10ms UPS function can be useful for a router or computer that needs brief backup during an outage.
BLUETTI lists 8 charging modes, including AC, car, solar and combined AC plus solar. The station weighs 9.5 lb, and its maker describes a 380W wall charging rate that can reach 80% in 45 minutes.
The 288Wh battery is the main limit. A 600W appliance could draw down that capacity quickly, so this model works better for a few small devices than a long appliance run.
Choose it for a compact setup with a higher output ceiling than the Explorer 300. Compare its smaller capacity with the Mega 1 if you need longer runtime.
Anker SOLIX S2000 Portable Power Station: Best for longer fridge backup
- 2,010Wh capacity
- 1,500W continuous output
- 3,000W peak output
- 35.7 lb
The 2,010Wh battery gives this Anker model more stored energy than the 1kWh options. Anker reports up to 35 hours for a specified refrigerator test, while actual runtime depends on the fridge and conditions.
Pros
- 2,010Wh capacity
- 1,500W continuous output
- Supports up to 400W solar input
Cons
- 35.7 lb to move
- No 12V DC port
The Anker SOLIX S2000 prioritizes stored energy, with 2,010Wh capacity and 1,500W continuous output. Anker reports up to 35 hours of fridge backup under a specific lab setup, so treat that as a reference tied to those conditions rather than a guarantee for every refrigerator.
It weighs 35.7 lb and has eight outlets arranged at the front and rear. The design has no 12V DC port, so check your planned connections if you use car accessories or other DC devices.
Anker says the station supports up to 400W solar input and can recharge through several methods, including AC, solar and car outlet. A 2kWh battery gives you more stored energy than a 1kWh station, though it does not raise the 1,500W continuous output ceiling.
Choose it when longer runtime matters more than the Mega 1's 2,000W output. If you are comparing brands, our best Pecron power station picks and best Renogy portable power station guide offer two other lineups to consider.
Westinghouse iGen400s 400 Watt: Best for small electronics and lights
- 183Wh capacity
- 200W running output
- 400W peak output
- 5 lb
The 183Wh battery and 200W running output are intended for small devices rather than larger appliances. Its 5 lb weight and built-in flashlight suit grab-and-go use.
Pros
- 5 lb weight
- Multiple USB ports and two AC outlets
- Built-in flashlight and flasher
Cons
- 200W running output
- AC power adapter is not included
The Westinghouse iGen400s is a small device station with 183Wh capacity and 200W running output. It weighs 5 lb and includes a tri-mode flashlight and flasher for camping or emergency use.
Its ports include two AC outlets, three 30W USB-C ports, one 100W USB-C port, two USB-A ports and a 12V DC port. The AC power adapter is not included, so factor in a compatible adapter if you want the stated faster wall charging setup.
The 400W peak figure is not the same as its 200W running output. Use the lower continuous figure when checking a device's normal draw.
Choose it for phones, lights and small electronics where portability comes first. For a fridge or kitchen appliance, move up to a higher capacity and output class.
DJI Power 1000 V2 Portable Power Station: Best for quiet 1kWh use
- 1,024Wh capacity
- 37-minute charge to 80%
- 10ms UPS switchover
- 26 dB stated low noise
DJI's 1,024Wh model is described with a 37-minute charge to 80%, a 10ms UPS function and low noise from 26 dB. Solar and car charging need separate compatible adapters.
Pros
- 1,024Wh capacity
- 10ms UPS switchover
- Dual 140W USB-C ports
Cons
- Solar adapter is separate
- Car charging module is separate
DJI's Power 1000 V2 offers 1,024Wh capacity and a stated 37-minute charge to 80%. DJI also describes 10ms UPS switchover and noise as low as 26 dB.
Its dual USB-C ports provide up to 140W each, which can help when charging higher draw USB-C devices. The product includes an AC cable, while solar and car charging require separate compatible adapters because MPPT and car charging modules are not built in.
The supplied product information gives a 2,600W output figure in its item highlight but does not specify the continuous output in the same way as the other picks. Check the exact AC output and appliance startup needs before choosing it for a load near that limit.
Consider it when quiet operation and rapid charging are priorities. The Mega 1 has a clearly stated 2,000W continuous rating and built-in MPPT according to its product features.
DJI Power 2000 Portable Power Station: Best for high-capacity DJI backup
- 2,048Wh capacity
- Recharge to 80% in 55 minutes
- Expansion up to 22.5kWh
- 10ms UPS switchover
The Power 2000 has double the stated capacity of a 1kWh station and supports expansion up to 22.5kWh with separate expansion batteries. Its 15 ports can serve several people charging devices together.
Pros
- 2,048Wh capacity
- Expansion support up to 22.5kWh
- App control
Cons
- Expansion batteries are sold separately
- Solar adapter is separate
The DJI Power 2000 is the high-capacity option in this set, with 2,048Wh capacity and support for expansion up to 22.5kWh using separate batteries. DJI says it recharges to 80% in 55 minutes and has a 10ms UPS function.
Its 15 ports can serve several people charging phones, lights, fans and laptops during a group trip. DJI also describes app control without a separate power dongle, plus operating noise as low as 30 dB.
Solar and car charging need separate compatible adapters, and expansion batteries are separate purchases. Weigh the station and its planned accessories against your vehicle space and carrying needs before choosing it.
Pick the Power 2000 for a large reserve and a possible expansion path. The Mega 1 is the more compact OUPES-focused alternative, while the Anker SOLIX S2000 offers 2,010Wh in a different setup.
How should you compare capacity and output?
Capacity tells you how much energy a station stores, while output limits how much power it can deliver at one time. For models around that output class, see our 1000W power station guide.
Check both numbers against your devices because a large battery can still have an output ceiling that is too low for an appliance.
A rough runtime estimate divides usable watt-hours by the device's average watts. Real use can be shorter due to inverter losses, startup draw, changing appliance cycles and other devices connected at once.
For example, a 60W laptop is a modest load for a station rated above 300W. A heating appliance or motor may need more power at startup, so compare its running and peak requirements with the station's continuous and surge ratings.
The Mega 1 stands out for combining 1,024Wh with 2,000W continuous output. A 2,010Wh or 2,048Wh station stores more energy, but capacity alone does not mean it can run a device whose wattage exceeds its output limit.
Which features matter for camping and backup?
For camping, weight, port selection and recharging options affect how easy a station is to use. A 5 lb unit is simple to carry for small devices, while a 27.8 lb Mega 1 asks for more space and a shorter carry from vehicle to campsite.
For home backup, check whether you need UPS switchover, how long your essential devices may run, and whether the station can be recharged before the next outage. The Mega 1, Elite 100 V2, Elite 30 V2 and both DJI models describe UPS functions, with stated transfer times ranging from under 20ms to 10ms.
Solar compatibility varies. The Jackery Explorer 1000 v2 works only with Jackery solar panels, the DJI models need separate compatible adapters for solar input, and the OUPES Mega 1 has built-in MPPT.
Before connecting loads, confirm the station's continuous output and your device's wattage. Our portable power station use guide covers basic connection and load checks.
Is the OUPES Mega 1 the right choice?
The Mega 1 is a strong fit if you want 1,024Wh, 2,000W continuous output and a path to 5,120Wh with extra batteries. It weighs 27.8 lb, so its capacity and expansion are more important than carrying it long distances.
Choose a compact station if your normal loads are phones, lights or a laptop and you value low carry weight. Choose a 2kWh model if runtime is the priority, and compare the appliance output limit separately.
For the best OUPES portable power station match, start with the load you expect to run, then compare its watts and runtime needs with the Mega 1. Check battery expansion and charging compatibility if your power needs may grow.
Our top 3 picks at a glance
-
1
Best for light loads on short trips
Jackery Explorer 300 Portable Power Station
9.7/10 our score
See it on Amazon -
2
Best for portable 1kWh power
Jackery Explorer 1000 v2 Portable Power Station
9.6/10 our score
See it on Amazon -
3
Best for UPS and quick recharging
BLUETTI Elite 100 V2 Portable Power Station
9.6/10 our score
See it on Amazon
Frequently asked questions
What size portable power station do I need?
Choose capacity from the total energy your devices need between charges, then check that the station's continuous output can handle their combined running watts. A 292Wh model suits shorter, lighter loads, while 1,024Wh or more gives you more stored energy.
Allow extra capacity for conversion losses and changing device use.
Can an OUPES Mega 1 run a 2,000W appliance?
The OUPES Mega 1 is rated for 2,000W continuous output, so an appliance drawing no more than that may fit its output limit. Check the appliance's running and startup draw, since a brief surge can exceed its normal wattage.
Capacity also determines how long it can run.
Can you expand the OUPES Mega 1 battery?
Yes. OUPES says the Mega 1 can connect to as many as two B2 extra batteries, increasing capacity from 1,024Wh to 5,120Wh.
Plan for the added batteries as separate equipment and verify compatibility before buying.
How do I estimate power station runtime?
Divide usable watt-hours by the device's average watts for a rough estimate. For example, a 60W load on a 300Wh station may run about 4.3 hours using the maker's stated 85% factor.
Actual runtime changes with inverter losses, device cycling and other loads.
Are OUPES stations good for camping?
They can suit camping when capacity, output and weight match your gear. A small unit can charge phones and lights, while a 1kWh model can support larger loads for longer.
Check the device wattage, station weight and recharging options before packing.
